Spectrophotometric determination of arsenic in water samples based on micro particle formation of ethyl violet-molybdoarsenate.

In this study, a simple and sensitive method for the determination of arsenic in water samples was developed. The method is based on the formation of micro particles of Ethyl Violet and molybdoarsenate, which gives an apparently homogeneous blue color to the solution. The absorption of the excess dye gradually decreases due to its conversion to a colorless carbinol species under strongly acidic conditions. Consequently, the sufficiently low reagent blank enables the spectrophotometric determination of arsenic with the detection limit of 4 microg l(-1). The coefficient of variation for the spectrophotometry at 50 microg l(-1) was 3.5% (n = 5). Furthermore, it is possible to detect concentrations as low as 10 microg l(-1) of arsenic visually. Our method will be useful as a simple, rapid, and cost-effective field test of arsenic, requiring no complex apparatus or skilled laboratory support.     

Separation of V(V)-4-(2-pyridylazo)resorcinolato complex from a large excess reagent using an ODS cartridge for high-performance liquid chromatography.

A selective off-line preconcentration technique for the V(V) complex with 4-(2-pyridylazo)resorcinol has been developed and successfully applied to the determination of V(V) in an air-borne sample. The target complex was separated from excess reagent using an ODS cartridge and water as the eluent. The complex was then concentrated on another ODS cartridge using tetrabutylammonium bromide and eluted with methanol; the eluate was applied to a one-drop concentration/HPLC. A detection limit as low as (6.05 +/- 0.82)x 10(-11) M (5 ppt) was achieved.     

Vertices of Degree 5 in a Contraction Critically 5-connected Graph

An edge of a k-connected graph is said to be k-contractible if the contraction of the edge results in a k-connected graph. A k-connected graph with no k-contractible edge is said to be contraction critically k-connected. We prove that a contraction critically 5-connected graph on n vertices has at least n/5 vertices of degree 5. We also show that, for a graph G and an integer k greater than 4, there exists a contraction critically k-connected graph which has G as its induced subgraph.     

Behavior strategies,mixed strategies and perfect recall

When perfect recall is not satisfied, the informational contents of mixed and behavior strategies differ and are more than what the information partition describes. First, we consider two kinds of additional information strategies may carry, and show that such information leads to theperfect recall refinement of a given information partition. This does not, however, imply that the strategies compensate fully for the lack of perfect recall. We give a necessary and sufficient condition on an information partition, calledA-loss, for the informational content of mixed strategies to fully compensate for the lack of perfect recall. The informational content of behavior strategies never fully compensates.     

Visualization of tip vortex flow in an open axial fan by EFD

The behavior of tip vortex in an axial fan without casing wall (called open axial fan) was discussed and analyzed. The velocity measurement was performed by using two-components Laser Doppler Velocimetry (LDV) system. The detailed velocity and vorticity distribution inside blade passage and downstream of rotor were obtained. Thus the structure of tip vortex and its behavior were graphically visualized by experimental fluid dynamics (EFD). The tip vortex flow trace was indicated with the calculation of vorticity. As a result, it was found that tip vortex was generated at blade tip region near leading edge and it extended to downstream of blade exit with its core tending inward to hub direction. In addition, leading edge vortex was also found at the forepart of the experimental open fan.     

The IR modulator utilizing light scattering effect with ferroelectric liquid crystal for gas analysis

Experimental infrared modulator elements have been fabricated utilizing the transient light scattering effect of ferroelectric liquid crystal with asymmetric waveform voltage drive. The new elements perform 80% modulation degrees at the 632.8nm. We have also achieved 30% modulation degrees in the 4 to 5µ m region where the strongest CO₂ absorption bands exist. A new type of analyzer which monitors ambient air quality has been developed. This analyzer uses non-dispersive infrared absorption method and composes of a double-beam, a single detector and a pair of liquid crystal light modulator as the IR chopper. The detection has achieved 10ppm noise equivalent concentration.     

Determination of elemental and ionic compositions for diesel exhaust particles by particle induced X-ray emission and ion chromatography analysis.

The purpose of this study is to clarify the chemical characterization of PM2.5 and PM10 in diesel exhaust particles (DEP). Sampling of PM2.5 and PM10 in DEP was carried out in November 1999 using an automobile exhaust testing system at the National Traffic Safety and Environment Laboratory, with a diesel truck (engine type: direct injection, displacement: 7,961 cc, carrying weight: 2,020 kg, equivalent inertia weight: 5,600 kg) placed on a chassis dynamometer. Sampling conditions included idling, constant speed of 40 km/h, M-15 test pattern and 60%-revolution/40%-load of maximum power. Samples were collected on a polycarbonate membrane filter (Nuclepore, pore size: 0.8 microm) using a MiniVol Portable Air Sampler (Airmetrics Co., Inc.). The concentrations of several elemental and ionic species in the PM2.5 and PM10 samples were determined by particle induced X-ray emission (PIXE) and ion chromatography analysis. PIXE analysis of the PM2.5 and PM10 samples revealed 15 elements, of which Na, Mg, Si, S, Cl, Ca, Fe and Zn were found to be the major components. Ionic species were Cl-, NO2-, NO3-, SO4(2-), Na+, NH4+, K+ and Ca2+. Concentrations of elements and ionic species under the sampling condition of 60%-revolution/40%-load were highest in comparison with those of the other sampling conditions. The elemental and ionic species data were compared for PM2.5 and PM10; PM2.5 concentrations were 70% or more of PM10 concentrations for the majority of elements, and concentrations of ionic species in PM2.5 and PM10 were almost identical.     

Synthesis and morphology of polyethylene‐block‐poly(methyl methacrylate) through the combination of metallocene catalysis with living radical polymerization

Polyethylene‐block‐poly(methyl methacrylate) (PE‐b‐PMMA) was successfully synthesized through the combination of metallocene catalysis with living radical polymerization. Terminally hydroxylated polyethylene, prepared by ethylene/allyl alcohol copolymerization with a specific zirconium metallocene/methylaluminoxane/triethylaluminum catalyst system, was treated with 2‐bromoisobutyryl bromide to produce terminally esterified polyethylene (PE‐Br). With the resulting PE‐Br as an initiator for transition‐metal‐mediated living radical polymerization, methyl methacrylate polymerization was subsequently performed with CuBr or RuCl₂(PPh₃)₃ as a catalyst. Then, PE‐b‐PMMA block copolymers of different poly(methyl methacrylate) (PMMA) contents were prepared. Transmission electron microscopy of the obtained block copolymers revealed unique morphological features that depended on the content of the PMMA segment. The block copolymer possessing 75 wt % PMMA contained 50–100‐nm spherical polyethylene lamellae uniformly dispersed in the PMMA matrix. Moreover, the PE‐b‐PMMA block copolymers effectively compatibilized homopolyethylene and homo‐PMMA at a nanometer level. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3965–3973, 2003     

Synthesis and crosslinking reaction of poly(hydroxyurethane) bearing a secondary amine structure in the main chain

This article describes the polyaddition of bifunctional five‐membered cyclic carbonates and diethylenetriamine. The polyaddition proceeded via the selective addition of the primary amino group to the cyclic carbonates to give poly(hydroxyurethane)s bearing a secondary amine structure in the main chain. The resulting poly (hydroxyurethane) having a secondary amine structure was crosslinked by a reaction with a bifunctional dithiocarbonate to give a networked poly(hydroxyurethane–mercaptothiourethane). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5899–5905, 2005